With the introduction of ProtoGel Quick-Cast, the time required for casting gels for Western Blots has been reduced from 2 hours to under 25 minutes, and the number of steps involved has been cut from 10 to only 3. With ProtoGel Quick-Cast, simply measure out the amount needed, add initiators and cast the gel. No mixing, no multiple measurements, no need for a second casting to produce a stacking gel.

ProtoGel Quick-Cast gels are run in standard 1X Tris-Glycine SDS. Electrical parameters will vary from apparatus to apparatus, but typically gels are run at 170V for 60 minutes.ProtoGel Quick-Cast gels require no special handling after the run. Simply stain according to standard protocols.

Keep in a tightly closed container, stored in a cooled, dry, ventilated area. Protect from physical damage. Isolate from incompatible materials. Avoid contact and inhalation. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling. Wear special protective equipment where exposures may exceed established levels.

• Ideal for Western Blotting applications
• Cast a 12% gel in a quarter of the time
• Eliminates mixing and measuring
• Finish your Westerns in a normal working day: Casting (prep and polymerization) 30 minutes, Running 1 hr, Transfer (including prep time) 1.5 hr, Blocking 1 hr Probing (primary and secondary) 2 hr, Washing 1.5 hrs, Detection 30 min = Total Time 8 hr
• Precast convenience without the precast price
• Stable for 24 months when stored tightly capped in the refrigerator (4 degrees C)